According to the Oklahoma State Department of Health, heat-related illnesses can be deadly.
Part of the department’s heat safety advice is to stay in an air-conditioned room.
Drinking more cool fluids can also help keep heat-related conditions at bay.
Both recommendations largely rely on your home having a working electrical system.
After all, if you don’t have power, your AC won’t be able to cool you down.
Your fridge won’t be able to give you cold water, either.
Expert OKC electrical services can help keep your electrical system in tip-top condition.
To that end, we made this guide listing the key services you need licensed OKC electricians for.
Read on to discover what they are, their importance, and when exactly you need them.
1. Upgrading a Circuit Breaker Panel
A circuit breaker panel is a safety device that distributes electricity in a home.
Modern panels can provide 200 amps of power, while older ones can supply just 100 amps.
The very old ones, usually in homes built from 1950 to around 1965, only provide 60 amps.
If you still have a 60- or even a 100-amp panel, it’s a good idea to upgrade your circuit breaker panel.
For starters, 200 amps are now the standard capacity for single-family homes.
A 200-amp panel doesn’t use more electricity itself.
Instead, it makes more electricity available by giving you more electrical capacity.
For example, it lets you add more circuits that can then supply new electrical appliances.
Please note that only a licensed electrician can upgrade a circuit breaker panel in OKC.
In fact, only state-licensed electrical contractors can do electrical work in OKC.
OKC also requires electricians to register with the City of Oklahoma.
Even electrical permits are only given to licensed Oklahoma City electricians.
2. Electrical Repairs
According to the U.S. Fire Administration, about 379,600 home fires occurred in the US in 2018.
Of these, 6.8% were due to electrical malfunctions, and over 5% were due to appliances and equipment.
Some of those residential fires occurred in none other than OKC.
Please keep in mind that a single small flame can turn into a massive fire in just half a minute.
This flame, in turn, can start from a faulty electrical wire or outlet.
Such malfunctions can occur due to age, overloaded wiring, or even rodent damage.
If you live in an older home, an aging electrical system can put you in such danger.
The same can happen if you tend to overload sockets.
Constantly flickering lights are a good indication of faulty wiring and connections.
Non-working or even burnt outlets are also red flags of electrical problems.
If you’ve experienced or seen any of these, please take them as signs that you need electrical repairs.
Don’t delay getting these issues addressed, as they can all contribute to a house fire.
3. Electrical Updates to Bring Your Home Up to Code
The National Electrical Code (NEC) is the standard followed by OKC. Oklahoma City has specifically adopted the 2017 National Electrical Code, NFPA 70 standard.
As a law, it applies to every property owner, including homeowners.
However, these standards often get revised now and then.
As such, many homes that have already existed prior to the revision are most likely not up to code.
That might include your home (unless it’s a brand-new construction).
Common NEC violations include wire overcrowding and overloaded or undersized circuits.
Using old wiring for new light fixtures and mislabeling circuits are also widespread.
Many older homes also violate the NEC by not having GFCI or AFCI protection.
By law, the OKC government considers NEC violations as class a or class b offenses.
However, most homeowners don’t get penalized unless someone actually reports them.
That doesn’t mean it’s OK not to bring your home up to code, as these codes exist to safeguard people in the first place.
Fortunately, you can have all these possible violations corrected by OKC electricians.
You can start by scheduling an electrical safety inspection.
These comprehensive inspections will reveal not only potential violations but dangerous situations, too.
From there, the electricians will educate you about your repair or upgrade options.
4. Safety and Security System Installation
Oklahoma City’s crime rate dropped by 3% in 2020 compared to 2019.
That’s good news, but the thing is, more than 25,000 property crimes still occurred in the city in 2020.
That’s a good enough reason to consider beefing up your home’s safety and security.
Your local licensed OKC electricians can help you set up some of these devices.
For starters, they can install outdoor security lighting to illuminate your property’s exterior.
You can also rely on them to install safety lights.
OKC electricians are experts in installing video doorbells, too.
They can also set up door and window sensors, as well as smoke and carbon monoxide detectors.
You can even get water leak detection monitors for your home!
5. Installation of a Whole-Home Surge Protection System
Lightning strikes, grid disruptions, and tripped breakers can all cause a power surge.
However, it can also result from the use of high-power equipment, such as air conditioners.
In any case, power spikes can cause internal damage to electronics and appliances.
They can fry circuit boards and even destroy LED lightbulbs.
Even smaller power surges can cause slow deterioration of your pricey devices.
A whole-home surge protector guards your valuables against these effects of power spikes.
It costs a fraction of what you’d otherwise pay to buy new appliances damaged by power spikes.
Keep Safe and Secure With Professional OKC Electrical Services
There you have it, five of the most crucial OKC electrical services that can help keep your home safe and secure.
From panel upgrades to wire repairs, a licensed OKC electrician can safely carry them all out for you.
Ready to make your Oklahoma City home safer and more secure?
Then please know that our team here at Spartan Electrical Services is ready to help!
Connect with us now, and we’ll be more than happy to assist you with all your electrical needs.